A difficult part of exporting plastic scrap to China is figuring out exactly what you can and cannot import. For most plastic brokers and dealers, it takes years of experience and trial and error before getting a clear answer. While I cannot cover this topic in a short article, a thing to be careful about is reflective (metallic) pieces or parts inside your plastic scrap loads. Continue reading »
What does PC stand for?
PC is an acronym for PolyCarbonates, a group of thermoplastic polymers containing carbonate groups (carbon that is bonded to three oxygen groups).
What is PC’s plastic identification number?
PC does not have its own plastic number. Instead, PC is identified by number 7, which is “other†plastic types. Continue reading »
What does ABS stand for?
ABS is an acronym for Acrylonitrile Butadiene Styrene, a copolymer thermoplastic manufactured from the polymerization of Styrene and Acrylonitrile in the presence of Polybutadiene.
What is ABS’s plastic number?
ABS does not have its own plastic number. Products made with ABS use recycling number 7, which represent “other†plastic types.
You may find ABS products marked with a recycling symbol and “ABS†written inside or beneath it.
What does PS stand for?
PS is an acronym for PolyStyrene, a rigid, glassy thermoplastic that is derived from petroleum.
What is PS’s plastic number?
Polystyrene is recycling number 6.
What does PP stand for?
PP is an acronym for PolyPropylene and is a thermoplastic manufactured from propylene gas in presence of a catalyst (such as titanium chloride).
What is PP’s plastic number?
PP is recycling number 5 and is used in both structural plastic and as a fiber.
What does LDPE stand for?
LDPE is an acronym for Low Density PolyEthylene and is a thermoplastic derived from petroleum used mainly in the plastic bag and film industry.
What is LDPE’s plastic number?
LDPE is recycling number 4.
What does PVC stand for?
PVC is an acronym for PolyVinyl Chloride and is a thermoplastic polymer accidentally discovered in the 1920s and commonly used in construction. In general, PVCs are separated into two types, rigid and flexible.
What is PVC’s plastic number?
PVC is plastic number 3.
What is the difference between thermoplastic and thermosetting plastics?
Plastics are divided into two groups depending on how it reacts to heat. Thermoplastics can be repeatedly softened by heating and hardened by cooling. Thermosetting plastics, however, harden permanently after being heated once.
What does HDPE stand for?
HDPE is an acronym for High Density PolyEthylene and is a thermoplastic prepared from ethylene by a catalytic process. The global market for HDPE in 2007 is around 30 million tons.
What is HDPE’s plastic number?
The recycling number for HDPE is #2.
HDPE is a very commonly recycled type of plastic and is well accepted in most recycling centers.
What does PET stand for?
PET stands for PolyEthylene Terephthalate and is sometimes referred to as PETE, PETP, or PET-P. PET is a thermoplastic polymer in the polyester family that is formed by combining two types of monomers together; ethylene glycol and purified terephthalic acid.
Since the start of the plastic scrap industry, PET has been a hot selling commodity. This is because the common plastic soda/water bottle (made with PET pla...
What is the difference between thermoplastic and thermosetting plastics? Plastics are divided into two groups depending on how it reacts to heat. Thermoplast...
These red, fashionable, sporty-looking, recycled plastic bag shoes (pictured above) are designed by Israeli designer Galit Begas and brings awareness about ...
What does PC stand for? PC is an acronym for PolyCarbonates, a group of thermoplastic polymers containing carbonate groups (carbon that is bonded to three ...
Polymer is a word derived from Greek meaning many parts or segments; “poly†means many and “meros†means parts or segments. Polymer...
© 2013 Recycled Plastic dot Com. All Rights Reserved.
Classified Ads Software | Powered by WordPress
